ACCLINO® heal
Stent
Lasercut aneurysm bridging stent
with HEAL Technology
ACCLINO® heal
Stent
Lasercut, self-expanding nitinol stent with HEAL Technology
- HEAL Technology - next generation antithrombogenic coating
- Patented asymmetric closed cell design for high flexibility
- Excellent wall apposition, reliable opening behavior
- Very good visibility due to platinum markers
- CE mark approved for vessel diameters from 1.5 - 7.0 mm
- Stents with diameters up to 5.5 mm deliverable through 0.0165’’ ID microcatheters
- Repositionable up to 90 % of its length
Note:
The ACCLINO® heal Stent is currently in Limited Market Release.
Please contact your Acandis® representative for product availability.
Note: Magnetic Resonance Imaging (MRI) Information
Non-clinical tests have shown that the Acandis implant is suitable for MR-examination. After implantation, patients can be safely scanned with a static magnetic field of 3 Tesla. The MR imaging quality may be affected if the implant is located in the area of interest. Optimisation of the imaging parameters is recommended.
For further information on MRI compatibility please consult the instructions for use of the respective product.
Clinical Results
Find publications and clinical studies on our products.
Clinical Experience
with ACCLINO® heal Stent
Pre-Treatment
After Stent Placement
Post-Treatment
Images are courtesy of Dr. Annette Förschler,
Schlosspark-Clinic Charlottenburg Berlin, Germany
Contact
Clinical Support (clinical-support@acandis.com)
Disclaimer:
Please consult the Instructions for Use for all indications, contraindications, warnings, cautions as well as possible adverse effects. Acandis® products are to be used exclusively by trained medical professionals. Orders are taken only in regions where the product is approved.
Please contact an Acandis® representative for product availability.